So you’ve installed a gun safe. Now you can’t see what’s inside, and you’re trying to find your shotgun by touch. It’s happened to a lot of folks.
Maybe your gun safe is like a big, cavernous closet bathed in shadow. Maybe it’s a standard size safe, but it’s inside a closet. Or maybe you want to be able to access your firearms quickly during a power outage. Whatever your reason, you need a safe light.
We’ve looked at the best gun safe lighting on the market, and chosen the top 10 for our reviews. In making our selection, we considered durability, power use, ease of installation, batteries, and value. We’ve also tried to cover a wide enough variety to fit any sized safe.
Whether you need illumination for your pistol safe, or whether you need big LED gun safe lights for your rifle safe, at least one of these lights should be right up your alley.
10 Best Gun Safe Lighting Options
1. IllumiSafe
Features
- Directional Lighting: IllumiSafe LED light easily attaches to your safe door and the adjustable LED lights illuminate inward towards your gun locker for a much better range of illumination. Can be used for areas that have limited or no access to electricity.
- Motion Sensor Activation: No need to turn it on of off. This Immediately turns on when the door safe is opened, and will turn off on its own when the safe is closed. Light stays on for 60 seconds after last motion is detected.
- Magnetic Back Base: Back base magnetically attaches to the mount base for easy battery replacement. Due to its magnetic back base, you can replace batteries easily. 3 AAA batteries are required to but not included on this pack.
- Ready To Install: Simple to install, no hard-wiring. Each pack contains light, screws for mounting and an optional Velcro hook strip in case you want to attach to the fabric on the interior of your safe. This will work even if your safe is lined with carpet.
- Designed and Patented in the USA: The Motion Sensor Cabinet Safe Light was Proudly Designed and Patented in the USA by a Family Owned Business in the Land of The Free
The IllumiSafe is tiny and easy to mount.
Key Features
- Small twin LED
- Takes 3 AAA batteries
- Built-in motion sensor
- Magnetic mounting
At first glance, the IllumiSafe Gun Safe Light With Motion Sensor isn’t much to get excited about. It’s a motion sensor light with 2 LEDs, which isn’t as powerful as most of the lights we’ve looked at. However, it’s impressively versatile.
Because it’s constructed with a magnetic base, you can put the IllumiSafe anywhere in your safe, and both lights can be aimed independently. You can put this light right over your ammo, over the door, or next to the guns themselves.
It’s also fairly small – about the size of a small interior light – so you can put it inside some larger models of pistol safe.
The IllumiSafe light takes three AAA batteries. They’re easy to change since the unit is held together magnetically and simply pulls apart. Be prepared to change them every eight weeks, though. This light is a bit of a hog when it comes to energy.
Pros
- Directional beams
- Easy installation
- Inexpensive
Cons
- Short battery life
This is an affordable way to light up even a relatively small gun safe.
2. TORCHSTAR
TORCHSTAR
$41.99 in stock
5 used from $36.99
Features
- NO.1 Best-Selling LED lighting kit on Amazon: 12’’ LED light bars + motion sensor + UL-Listed A/C Power adapter + extra 12’’ extension cables + (10) screws
- A quick and great way to upgrade your kitchen cabinet, extremely easy installation that can be done with common household tools within minutes. You can find more well-matched extension cables and splitter cables in TORCHSTAR
- Comparing to battery operated lighting system, this electrical powered light kit is more suitable for permanent installation as it supplies more long-lasting and constant lighting. 150 lumens per light bar, high output LEDs provides an ultra-bright lighting effect but you never need to worry about batteries dying on you
- Light up Corner: Triangle design light bar, right-angle at backing with 3M tape, easy to install to the corners, such as the gun safe inside and under the cabinets. Can be fixed through the holes by screws
- Additional light bars can be added to fit big size long cabinet or counters. Extra extension cables included. Motion sensor detects movement within 26.25ft, turn on the lights immediately upon opening the safe and shut off after 4 minutes without movements
The TORCHSTAR LED Safe Lighting Kit is modular and affordable.
Key Features
- 4 12-inch LED strips
- 2 AC plugs
- Includes motion sensor
- Tape mounting
The TORCHSTAR LED Safe Lighting Kit is a set of four 12-inch LED strips, two AC plugs, and a motion sensor. Now, don’t panic. You don’t need to use both plugs. That’s just an option if you’re doing more than one safe. You can daisy chain all four LED strips on the same power supply with no problems.
The LEDs themselves are connected by 12-inch extension cables. If you want them further apart, that’s when you’d use the second power supply. They have a 3M tape backing for easy mounting on almost any surface. This makes them ideal for safes with multiple compartments, or with several ammunition shelves.
Be careful if your safe doesn’t have a power supply. This kit is designed to install easily if there’s already a power hole in the back. If not, you’ll need to drill a hole.
Pros
- Easy to mount
- Modular
- Suitable for safes with more than one compartment
- Affordable
Cons
- Some installation may be required
This kit is versatile enough for virtually any size or configuration of safe.
3. Executive
Features
Binding | Tools & Home Improvement |
Brand | Light My Safe |
Color | 2018 Version (Bagged Packaging) |
Department | mens |
EAN | 0796762742400 |
EAN List | EAN List Element: 0796762742400 |
Label | LIGHT MY SAFE |
Manufacturer | LIGHT MY SAFE |
Model | EXE5AC |
MPN | EXE5AC |
Package Dimensions | Height: 200; Length: 2050; Weight: 90; Width: 400 |
Package Quantity | 1 |
Part Number | EXE5AC |
Product Group | Lighting |
Product Type Name | HOME_LIGHTING_AND_LAMPS |
Publisher | LIGHT MY SAFE |
Size | 2,250 Lumens |
Studio | LIGHT MY SAFE |
Title | Executive Gun Safe Lighting Kit w/ Motion Switch : Tactical Grade American Lights - 2,250 Total Lumens |
UPC | 796762742400 |
UPC List | UPC List Element: 796762742400 |
The Light My Safe Executive is designed for large gun safes.
Key Features
- 5 20-inch LED strips
- Takes 120v power
- Includes motion sensor
- Adhesive or velcro mounted
The Light My Safe Executive Gun Safe Lighting Kit is a set of five 20-inch LED strips. These are bright lights – 450 lumens – and they’ll light up a fair bit of space. All of them can be daisy-chained using the connection cables that are included in the kit.
The lights and motion sensor can be mounted in one of two ways: either with an adhesive backing or with velcro strips. As a result, you can mount them on steel shelves or carpeted surfaces, making this kit useful for a variety of gun safes.
The Executive Gun Safe is on the pricier side and may require some assembly if you’re installing it in a safe that doesn’t have a built-in power supply. That said, it’s backed by Light My Safe’s lifetime warranty, which includes coverage for theft or fire damage.
Pros
- Easy mounting
- Durable
- Suitable for even the largest safes
- Lifetime manufacturer’s warranty
Cons
- Some assembly may be required
- Pricey
This is a powerful set of lights that’s well worth the money.
4. Kuled
Kuled
$16.50 in stock
Features
- Cabinet LED Light, Sensor LED light 80lm: the light will light up when you get within 3 meter of it and will go out 15 seconds after you walk out of its sensing range
- 3 pack Auto motion sensing LED light: 10 pcs bright white LED with super bright, long operating life, energy saving, and environmental friendly light.
- Battery Powered, PIR IR Sensing
- Battery require 4*AAA (not include)
- Please wait for 10 seconds to active the sensor for first time install the batteries.
The Kuled is suitable for almost any kind of gun safe.
Key Features
- 3-pack of 7.5-inch LED lights
- Takes 4 AAA batteries
- Built-in motion sensors
- Magnetic or adhesive mounting
The Kuled light bar comes in a 3-pack. Each bar is 7.5 inches long and has ten 80-lumen LED lights, as well as an independent motion sensor. They can be mounted magnetically or with adhesive strips. For a gun safe, we recommend the magnetic mount for most applications. If you absolutely have to mount it on a carpeted surface, it’s a good idea to pick up some velcro straps instead.
These bars are very affordable. Because they come in a 3-pack, you can use the extras to light up multiple safe compartments or to light up a workbench or cabinet. The only thing we didn’t like about them was their battery consumption. Each light takes four AAA batteries and burns through a whole set in about two weeks.
Pros
- Easy installation
- Versatile
- Affordable
Cons
- Short battery life
- Doesn’t mount well on carpet
These light bars can be used for one big safe, or divided up and put to multiple uses.
5. Liberty
Features
- CONVENIENCE - Brighten up your safe's interior and valuables with Liberty's new Brightview LED Wand Light Kit including auto on/off motion sensor for convenience.
- INSTALLATION - Easy connection snaps, the LED wand light kits are simple to install.
- EFFICIENT - Highly efficient LED bulbs and electronics to maximize battery life and indicator lets you know when batteries are low (AAA batteries included).
- AMERICAN MADE
The Liberty Safe Brightview is battery-powered and mounts directly to your fireboard.
Key Features
- 2 8-inch LED strips
- Takes 3 AAA batteries
- Built-in motion sensors
- Pin mounts to fireboard
The Liberty Safe Brightview Gun Safe Light is a set of two 8-inch LED light strips. Each strip contains six bright white LEDs, has its own built-in motion sensor, and is powered by three AAA batteries.
Since this light was made by Liberty Safes, we were excited to give it a try. The mounting pins are easy to push into any fireboard and pop out smoothly when needed. When you’re not tugging at them, they’re surprisingly secure, just as secure as any velcro mount.
The battery life is also pretty good – about three months assuming you don’t go into your safe more than once a week. That said, the motion detectors require at least a small amount of ambient light to work. If you’re trying to get your guns in the dark, these lights won’t turn on.
Pros
- Designed specifically for Liberty safes
- Easy to mount
- Good battery life
- Inexpensive
Cons
- Poor motion detection
This is a very easy gun safe light to install.
6. LOCKDOWN
LOCKDOWN
$21.33 in stock
Features
- DIMENSIONS: 3" W x 7.5" H
- RUNTIME: Provides 5 hours of continuous light powered by 3 'AAA' batteries (not included)
- EASE OF USE: Light features manual On/Off for controled usage
- BRIGHTNESS: 75 LEDs provide 95 lumens of light
- VERSATILE: Attach with strong magnet backing or included hardware
The LOCKDOWN has a slim profile and mounts easily in most safes.
Key Features
- One flat, 95-lumen light
- Takes 3 AAA batteries
- Screw or magnetic mount
- Push-button on/off
The LOCKDOWN Cordless 75 LED Vault Light is a single-piece, flat light with 75 LED bulbs that put out a total of 95 lumens. It measures 7.5 x 3 x 0.5 inches, about the size of a large smartphone, and is designed to mount directly to the side of your safe.
If your safe has metal walls or shelves, it does this easily using its magnets. Alternatively, this light comes with a set of screws for mounting on the carpet. We’d pick up some longer screws, though. The included set is too short to be secure.
This safe has no motion detection, which can be a drawback. However, the large on/off button is easy to find, and the LOCKDOWN’s battery lasts far longer without the need to power a motion sensor – about 5 hours of continuous operation.
Pros
- Slim profile
- Strong magnetic mount
- Exceptional battery life
- Inexpensive
Cons
- No motion detector
- Mounts poorly on carpet
This inexpensive light has impressive battery life.
7. OxyLED
OxyLED
Features
- AUTOMATIC SENSOR: With passive infrared technology, it can be detected by the motion of a human in the dark. The OxyLED Motion Sensor Closet Lights are auto-on within 10 feet, and auto-off after 15-18 seconds of no motion detected helps prolong battery life.
- ULTRA-BRIGHT LED CLOSET LIGHTS: The wireless motion sensor lights with 10 LED in each light, OxyLED motion sensor led lights to provide enough light to make sure you never stumble in the dark. Fantastic energy-saving and environmentally friendly ensure an extra-long life for your light.
- BATTERY OPERATED: Each under-cabinet light bar is Powered by 4PCS AAA batteries (not included, Tip: Please use safe and reliable batteries to prevent light damage due to battery leaks. Warm prompt: 1. The cordless lights won't turn on if the light sensor has been detected by enough light. 2. Never install the led sensor light near a place that is damp or with a high temperature to ensure the sticky tape work well.
- DETACHABLE DESIGN FOR EASY MOUNT AND POP OFF: An adhesive strip with magnetic fields is easily attached to and detachable from the closet lights body. No tools, screws, or nuts are required.
- MULTI-PURPOSE: This safelight has a high-quality aluminum alloy case, which has better heat dissipation performance so It's a perfect choice to be used in the attic, basement, closet, cupboard, drawer, emergency supplies storage room, garage, mailbox, medicine cabinet, gun safe, storage unit, vanity mirror...
OxyLED Motion Sensor is easy to mount on metal surfaces.
Key Features
- 3-pack of 7.5-inch LED strips
- Takes 4 AAA batteries
- Built-in motion sensors
- Magnetic mounting
OxyLED Motion Sensor Closet Lights are a 3-pack of LED light strips. Each strip is powered by 4 AAA batteries and can be mounted independently of the others. The output of each 10-LED strip is 70 lumens, which is enough to light up a gun safe without blinding you afterward.
These lights have a light sensor in addition to a motion sensor. When the light sensor senses light, the motion sensor remains off. This helps them save battery life by not turning on unnecessarily but can cause them to remain off if your gun safe is already dimly lit.
The OxyLED ships with a magnetic backing that mounts well on most metallic-safe surfaces. However, you’ll need aftermarket velcro strips to mount it on carpeted shelving.
Pros
- Easy to mount
- Can be used in large or small safes
- Good battery life
- Inexpensive
Cons
- Won’t turn on in semi-darkness
- Mounts poorly on carpet
These lights are affordable and come in a 3-pack.
8. Sensky
Features
- 【Motion Activated Strip Light】 : Motion Sensor switch turn light on or off by human induction. You can open the back cover of the sensor to adjust time delay(2-280s), LUX value(10-300lux), Sensor distance (10cm-7M)
- 【UL Listed Power Adapter】: Run on DC 12V, safe to children, Efficiency Level V.
- 【High Brightness and Long Life】: While normal LED brightness is 5-6 lm/LED, We use high brightness LED: 6-7lm/LED to ensure better lighting. 50000+ hours of long life.
- 【Strong Tape and Easy Installation】: Backed with strong double side tape, stick firmly to walls. You can easily cut the desired length, meanwhile, this light strip is ultra thin and fits perfectly in the narrow corners of the cabinets and around the wall.
- 【Seller warranty and Customer Service】: You can enjoy worry-free shopping by our 12 months satisfaction guarantee, if you're not satisfied, just message us and we will make things right. Plus, we've a picture on how avoide the most common problems, please read it carefully before using.
The Sensky Kit is a good choice for hobbyists and amateur electricians.
Key Features
- 8.2-foot coil of LED light strip
- Includes 120v power supply and patch cables
- Includes motion sensor
- Can be mounted with adhesive or velcro
The Seknsky Under Cabinet Lighting Kit gives you more bang for your buck than any other light on our list. You get a whopping 8.2 feet of LED light strip, which is enough to make your 64-gun safe look like one of the cars from Fast and the Furious. You also get an infrared motion sensor, a 120-volt power supply, and three, 8-inch patch cables.
This light strip is as slim as thin cardboard and can be mounted with adhesive or velcro, although you’ll have to supply your own.
On the downside? You’ll need to be comfortable wiring all this up by yourself. If you’re handy with electronics, you’ve just found yourself a monster of a light kit.
Pros
- Can light up many, many shelves
- Very slim profile
- Mounts on any surface
- Incredible value
Cons
- Requires some electrical skill to install
This is by far the best value gun safe light, provided you have the skill to install it.
9. Stack-On
Features
- 3 light heads – each with 3 LED lights
- Battery operated – no wiring needed
- Easy to install with mounting plate or hook & eye tape (both are included)
- Light heads pivot independently for directional lighting
- The lights can turn on automatically when the safe or cabinet door is opened
The Stack-On Motion lasts for up to a year between battery changes.
Key Features
- 3-LED light strip
- Takes 6 AAA batteries
- Built-in motion sensor
- Velcro, magnetic, and screw mounts included
The Stack-On Motion Sensitive Gun Safe Light is a large, 16-inch strip with three round LED clusters. The body of the unit is molded from tough polymer, and the motion sensor works reliably in all lighting conditions. This light takes 6 AAA batteries and lasts for up to a year between changes. It’s also very reasonably priced.
The Stack-On weighs almost 12 ounces, and that’s too much weight for the velcro and magnet strips they ship it with. The only reliable way to mount it is with the mounting screws, which are included. Make sure you have a carpeted surface, though, or you’ll end up returning it.
Pros
- Big and bright
- Reliable motion sensor
- Good battery life
- Affordable
Cons
- Needs to be screw mounted
This gun safe light is big, bright, and durable.
10. AMIR
AMIR
Features
- Battery Operated - Powered by 3PCS AAA batteries (not included) for coreless installation. To provide you with illumination in areas that have limited or no access to electricity
- Super-bright LED Bulbs - Up to 20 Lumen output, 6 pcs super bright SMD 2835 LED; bright enough to make sure you never stumble in the dark
- PIR Motion & Light Sensor - Auto-on within 10 feet, auto-off after 15 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected
- Easy Installation - Simple to install, no hard-wiring. With double-sided adhesive pads and built-in magnet, you can stick on anywhere you like
- Note: This light can only be turned on in darkness environment. It won't turn on if the light sensor has been detected by the enough light. And Please DO NOT install this light in high temperature place, otherwise, high temperatures will affect the adhesive strip, and then the light will slide easily!!
The AMIR lasts for up to six months on one set of batteries.
Key Features
- 3-pack of round LED lights
- Takes 3 AAA batteries
- Built-in motion sensors
- Adhesive and magnet mounting
AMIR New Vision Motion Sensor Lights come in a 3-pack. Each one is about the size of a coaster and puts out 25 lumens of light. The motion sensors are reliable and work in light conditions. They take three AAA batteries each and will go about six months before they need to be changed.
Now, we’re not messing around here. These are cheap lights. You’ll need to buy your own velcro or magnetic backing since the mounting hardware they include isn’t strong enough to hold the light. That said, AMIR has put their budget into the lights themselves, and the overall quality is better than anything else you see in this price range.
Pros
- Reliable motion sensors
- Good battery life
- Very inexpensive
Cons
- Needs velcro for mounting on carpet
- Not very bright
- Cheap mounting supplies
If you’re on a budget, these are reliable lights that will do the job.
Bottom Line
To decide what kind of light you want, the first thing you’ll need to ask yourself is whether or not you need your gun-safe light to work in a power outage. If you do, choose a battery-operated light. If you don’t, a hard-wired light will be more convenient, since you won’t have to change batteries.
You’ll also want to consider the ease of installation. Hard-wired kits can be more challenging on this front, but it depends on whether or not your safe has an internal power outlet. If it does, these systems can be among the easiest gun safe lights to install.
And you’ll still need to consider size, style, and durability.
At the end of the day, which light is the “best” depends on your needs and the type of safe you’re trying to light up. No matter what you ended up choosing, we hope you found our guide helpful and informative.
The Review
Best Gun Safe Lighting
Here are our reviews of the 10 best gun safe lighting options today!
Review Breakdown
-
IllumiSafe
-
TORCHSTAR
-
Executive
-
Kuled
-
Liberty
-
LOCKDOWN
-
OxyLED
-
Sensky
-
Stack-On
-
AMIR
Best Gun Safe Lighting DEALS
We collect information from many stores for best price available